Suche

Suche Trainingspläne

Letzte Kommentare

  • Tanja Heinz zweifache Deutsche Mastersmeisterin!!!
    Ulrich Ringleb 11.09.2021 14:13
    Großartiger Erfolg! Glückwunsch allen Beteiligten ... :lol:

    Weiterlesen...

×

Warnung

JUser: :_load: Fehler beim Laden des Benutzers mit der ID: 62
Print Friendly, PDF & Email

By David Pyne

Given the importance of endurance training in the preparation of all types of competitive swimmers, it is worth examining some of the different ways to construct endurance sets. Endurance training is used to develop three basic areas of aerobic fitness: sub-maximal or low-intensity aerobic (A1, A2), anaerobic threshold (AT) and maximal oxygen uptake (VO2 max or MVO2) capacities, as defined by the AIS Swimming Program’s Classification of Training (Pyne, 1993). The aim of this article is to discuss some of the criteria used in the design of endurance training sets. Thirty examples are provided to show some of the different combinations that can be used for an endurance set with a volume of 2400m.

Endurance fitness can be improved by both continuous and interval training. The evolution of training for competitive swimming has involved the universal usage of interval training for developing both aerobic and anaerobic capacities. Continuous or over-distance swimming is still a useful, if relatively uncommon, form of endurance training. Swimming speed should be monitored closely to ensure that the correct intensity is being maintained – heart rates should be below 150bpm or between 50 and 70 beats below its maximum level for each individual swimmer. Low-intensity aerobic (Al) intervals should be completed at the slowest possible speed at which correct technique can be maintained. Overdistance work of this type may include sets such as…

  • 1. 1 x 2400m FS continuous

  • 2. 3 x 800m FS on 11:00 with FIR <150bpm

  • 3. 6 x 400m FS on 5:20 with HR <150bpm

 

This type of training is usually undertaken in Freestyle and incorporates short to very short rest periods. Most well trained swimmers can tolerate work/rest ratios of around 6:1, and therefore, rest periods of a few seconds to a minute are most commonly used in the longer interval work. However a mix of strokes and drills should be integrated into this work to develop and maintain technical skills – good technique is required at all times. Breathing control should also be emphasised and practised (breathing to both sides and co-ordinated with stroke counts). Some variety in the continuous or long interval work will also limit the problems of boredom and loss of concentration … for example…

 

  • 4. 3x800m [alternating 200m FS breathing 5:5/200m BK] with 30s rest

  • 5. 6x400m [1,3,5: FS; 2,4,6: pull] on 5:00

  • 6. 6x400m [1,3,5: FS; 2,4,6: kick] with 10s rest

 

The most common methodology employed to develop and maintain endurance capacities is interval training. The specific nature of the adaptations necessary for the different components of endurance fitness … e.g. moderate-intensity aerobic (A2), anaerobic threshold (AT) and maximal oxygen uptake (VO2 max), require different types of interval training sets. The integrated programs used by most leading coaches combine endurance training, lactate tolerance and sprint work. There are six basic variables that can be manipulated in the prescription of interval training sets for swimming (Sharp, 1993)…

 

(i) Volume (total metres)

(ii) Duration (distance of each repetition)

(iii) Intensity (speed of each repetition)

(iv) Frequency (number of repetitions)

(v) Recovery (time between each repetition or set)

(vi) Type – Stroke (FS, BK, BR, FLY, IM) or combination – Drill, Kick, Pull

Changing one or more of these variables, even slightly, may substantially alter the physiological effects and benefits of the training set. Clear and concise instructions should be given to swimmers to ensure that training sets are completed to the requirements of the program. The following symbols are used in the examples shown below…

 

FS = Freestyle

BK = Backstroke

FLY = Butterfly

BR = Breaststroke

IM = Individual Medley

 

The first consideration is to determine the volume (i) of the endurance set. This will depend on a number of factors including the age and level of the swimmer, the event (sprint, middle-distance or distance), and the phase of training season. This may range prom 1000 to 4000m with most endurance sets for well-trained swimmers being between 2000-3000m. The next consideration is the repeat distance (ii) – most coaches use intervals from 50-400m with 100’s and 200’s being the most common distance. Studies in the swimming flume at the International Center for Aquatic Research in Colorado Springs (Troup, 1991) have shown that 100’s and 200’s are very effective in developing aerobic capacities (endurance fitness) … for example…

  • 7. 24x100m FS on 1:40

  • 8. 12x100m FS on 1:40, 24 x 50m FS on 0:50

  • 9. 4x [200m FS on 2:30, 2x150m FS on 1:50, 100m FS on 1:20]

 

The intensity (iii) and number of repetitions (iv) of each interval are then determined to ensure the appropriate stimulus is being achieved …i.e. low-intensity aerobic (Al), moderate-intensity aerobic (A2), anaerobic threshold (AT) or maximal oxygen uptake (VO2 max). The intensity (pace) of interval training is one of the most important determinants of the physiological effects of the set. Interval training can be divided into two broad categories: simple repeats or combination sets. Repeat sets, as the name implies, involve the repetition of the one interval, most often at the same intensity … for example…

  • 10. 24x100m FS holding 1:05 on a 1:40 cycle

  • 11. 12x200m BK holding 2:30 on 2:45 cycle

  • 12. 48x50m FS holding 32.5 on 40 cycle

 

This form of training would be familiar to all swimming coaches. There are, of course, an endless number of combinations that can be used, if the distance of the repeat is varied … for example…

  • 13. 2x (4x100m FS on 1:30, 8x50m FS on 45s)

  • 14. 8x (2x100m BK on l:30, 2x50m FS on 45s)

  • 15. 6x400m FS on 5:00

 

Variations in the speed or pace of the intervals provide a stimulus for different aspects of aerobic fitness. The short 50m efforts in these endurance sets are performed at a relatively higher intensity (200m race pace or faster) than the longer 100 or 200m efforts. Quite often a set time base or cycle (time per 50m interval) is used … e.g. 50m: on 45 seconds, 100m: 2 x 45s = 1:30, 150m: 3 x 45s = 2:15, etc.

  • 16. 3x [4x100m BR holding 1:20 on 1:45, 8x50m BR holding 36s on 1:00]

  • 17. 3x [200m (2:20), 2x150m, 2x100m, 2x50m (28.0)] FS on 45s time base

  • 18. 3x [400m (4:40), 200m (2:15), 100m (1:05), 2x50m (28.0)] FS on 45s time base

  • The nature of the set can also be altered by manipulating the rest or recovery period (v). By increasing or decreasing the recovery time it is fairly easy to vary the physiological demands of the training set. It is also possible to use active or passive rest – active rest or low to moderate intensity aerobic swimming (Al-A2) is the most effective form of recovery when there is sufficient time built into the set. For this reason, it is often worthwhile to include some active recovery swims during a long endurance set, particularly when more intensive anaerobic threshold (AT) or maximal oxygen uptake (VO2 max) work is being undertaken.

  • 19. 5x [4x100m BK holding 1:20,1:15,1:10 and 1:05 on 1:25 cycle] + 100m FS recovery

  • 20. 5x [400m FS holding 4:40 on 5:00, 100m FS recovery on 2:00]

  • 21. 4x [5x100m BR holding 1:25 on 1:40,100m FS recovery on 2:00]

  • The need to mix strokes (vi) in sets for individual medley and form swimmers is an additional consideration. Switching and mixing strokes in IM order … i.e. Butterfly-Backstroke-Breaststroke-Freestyle in various combinations, provides specific training for IM swimmers and general conditioning for swimmers of Freestyle and form strokes. Care is needed with the planning of Butterfly (less efficient at low and moderate intensity levels than Freestyle and Backstroke) and Breaststroke (the slowest stroke which requires a longer cycle time than the others).

  • 22. 24x100m [odds: Fly/BK on 1:40; evens BK/BR on 1:50]

  • 23. 2x [8x150m alternating Fly/BK/BR and BK/BR/FS]

  • 24. 6x [2x50m Fly, 100m BK, 100m BR, 2x50m FS]

  • The other type of interval work is where there is a mixture of different training speeds. In this work, moderate and higher quality intervals are combined to provide a better balanced training session. This may be in the form of a descending set, an alternating set, a spike set with one or two fast efforts, or a set that includes some explosive short sprints (high velocity overloads) of 10-25m in length. Example of this training would be sets such as…

     

    • 25. 4x [500m on 6:30 + 2x50m fast on 1:30]

    • 26. 4x [600m + 15m dive start]

    • 27. 4x [4x100m FS on 1:40 holding 1:04.1x100m FS on 2:30 holding 58]

    In this set of 100’s, the majority of the work is completed at controlled speeds (e.g. 1:04) at the anaerobic threshold (AT) level, with the final 100m repeat in each set undertaken at race speed (VO2 max level and above). This set may be more beneficial in the long term than a simple set like 16x100m on 1:40 holding 1:02. In the example, the swimmer would receive the physiological and neuromuscular benefits of fast work at 58.0 with the accumulative effects of holding 1:02-1:04. Most leading coaches will include both simple and combination (integrated) type endurance sets in their training programs.

    The advantages of this type of set include that it is more manageable for those swimmers with less-developed aerobic capacities such as sprinters, younger or older swimmers, and those coming back after a break. The swimmer is able to maintain better control, the fast 100m repeat provides a greater stimulus to the development of VO2 max capacities and is specific to the neuromuscular demands of competitive speed. Measurement of stroke rate may assist in ensuring that neuromuscular demands (i.e. speed of limb movement) are at the appropriate level. An integrated interval set also reduces the risk of excessive fatigue, which often manifests as an inability to maintain the repeat times towards the end of the set.

    • 28. 3x800m FS on 12:00 hold 36 strokes per 50m

  • 29. 4x [400m FS on 5:00, 4x50m holding 30s with 30 strokes]

  • 30. 4x [200m BR on 3:00, 2x50m BR holding 35s on 0:50 with 20 strokes, 1x100m BR holding 1:12 on 1:40, 200m FS]

  • It is likely that endurance training will be enhanced by a combination of both simple and integrated VO2 max training sets. We have outlined previously the aim of this type of work is to improve the swimming speed at a given metabolic cost (oxygen uptake). (Pyne and Touretski, 1993). Whilst many training programs will result in the improvement of maximal oxygen levels per se, the most important aim is to have faster swimmers, and not just those with the biggest aerobic capacities. The examples presented in this article are given as a guide only. There are, of course, as many different ways of designing training sets as there are swimming coaches.

     

    References

    Pyne, D. (1993) – The AIS Atlanta Training Plan, Australian Swim Coach 10(4):6-8

    Pyne, D. and Touretski, G. (1993) – An analysis of the training of Aleksandre Popov – Olympic Gold Medallist. Australian Swim Coach 10(5):7-14

    Sharp, R.L. (1993) – Prescribing and evaluating interval training sets in swimming – a proposed model. J. Swim. Res. 9: 36-40

    Troup, J. (1991) – International Center for Aquatic Research Annual, US Swimming Press, Colorado Springs

    Print Friendly, PDF & Email

    Kommentar schreiben

    Sicherheitscode
    Aktualisieren

    Registriere dich für unseren Newsletter - alle drei Tage neu!
    captcha 
    Copyright © 2024 Gießener SV Schwimmen. Alle Rechte vorbehalten.
    Joomla! ist freie, unter der GNU/GPL-Lizenz veröffentlichte Software.

    Joomla!-Debug-Konsole

    Sitzung

    Profil zum Laufzeitverhalten

    Speichernutzung

    Datenbankabfragen